All Categories
FLEXCUT TOOL
11-PIECE CRAFT CARVING KIT CRAFT CARVER KIT
11-Piece Craft Carving Kit, Pieces In Set 11 pcs. Contains palm handle, 10 interchangable blades, and wood block with preprinted design for carving. Includes rolled storage pouch. Included blades: No. 1 - 1/4" single bevel chisel, No. 3 - 3/8" sweep, No. 3 - 5/8" sweep, No. 5 - 9/16" sweep, No. 6 - 5/16" sweep, No. 9 - 1/5mm sweep, No. 11 - 1/8" sweep, No. 11 - 1/4" sweep, 45 deg. 1mm V-tool, and 70 deg. 1/4" V-tool.
NOBLE#:
N114X90
MPN:
SK107
FLEXCUT TOOL
3-PIECE WOOD CARVING KNIFE SET 3 KNIFE CARVING SET
3-Piece Wood Carving Knife Set, Pieces In Set 3 pcs. Each carving knife is constructed with an ash handle and a honed and polished high-carbon steel blade. The comfortable curved ergonomic handles allow for long periods of carving without hand fatigue. This starter set includes a cutting knife, a detail knife, and a roughing knife.
NOBLE#:
N284M53
MPN:
KN500
FLEXCUT TOOL
4-PIECE WOOD CARVING KNIFE SET CARVING
4-Piece Wood Carving Knife Set, Pieces In Set 4 Pcs. Each Carving Knife Is Constructed With An Ash Handle And A Honed And Polished, High-Carbon Steel Blade. Set Includes A Kn12 Cutting Knife, Kn13 Detail Knife, Kn18 Pelican Knife, Kn19 Mini-Pelican Knife, And Tool Roll.
NOBLE#:
N114X84
MPN:
KN100
FLEXCUT TOOL
5-PIECE BEGINNERS PALM CARVE SET BEGINNERS PALM CARVE SET
5-Piece Beginners Palm Carve Set, Pieces In Set 5 pcs. Great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The 5 profiles can perform a variety of tasks and carve moderate detail. Set includes: No. 2 - 5/16" skew, No. 3 - 3/8" gouge, No. 6 - 5/16" gouge, No. 11 - 1/8" gouge, and a 70 deg. 1/4" V-tool.
NOBLE#:
N114X87
MPN:
FR310
FLEXCUT TOOL
5-PIECE CRAFT CARVING KIT CRAFT CARVER KIT
5-Piece Craft Carving Kit, Pieces In Set 5 pcs. Contains palm handle, 4 interchangable blades, and wood block with preprinted design for carving. Includes 10-pocket rolled storage pouch. Included blades: No. 3 - 3/8" sweep, No. 6 - 5/16" sweep, No. 9 - 1.5mm sweep, and 70 deg. 1/4" V-tool.
NOBLE#:
N114X89
MPN:
SK106
FLEXCUT TOOL
CARVING TOOL SHARPENING KIT CARVING SHARPENING KIT
Carving Tool Sharpening Kit, Type Carving Tool Sharpening Kit. The Flexcut SlipStrop is an economical way for maintaining tool's razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used. Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions.
NOBLE#:
N114X86
MPN:
PW12
FLEXCUT TOOL
DETAIL CARVING KNIFE CARVING DETAIL KNIF
Detail Carving Knife, Blade Length 1-1/2". Constructed With An Ash Handle And A Honed And Polished, High-Carbon Steel Blade. Knife Has A Very Fine Point For Making The Very Narrow Cuts Associated With Detailing. Its Straight 1-1/2" Blade Can Accommodate Larger Stock Removal If Needed.
NOBLE#:
N114X71
MPN:
KN13
FLEXCUT TOOL
FLEX CUT CARVING KNIFE FLEXCUT CARVING KNIFE
Cutting Knife, Blade Length 1-1/8". Constructed with an ash handle and a honed and polished, high-carbon steel blade. General-purpose carving knife. It's more rounded point is very durable. Great beginners knife. 1-1/8" blade length.
NOBLE#:
N114X70
MPN:
KN12
FLEXCUT TOOL
FLEX CUT CHIP CARVING KNIFE CHIP CARVING KNIFE
Chip Carving Knife. Constructed with an ash handle and a honed and polished, high-carbon steel blade. Traditional chip carving knife; is honed, polished, and ready-to-carve.
NOBLE#:
N114X76
MPN:
KN15
FLEXCUT TOOL
FLEXCUT 3" DRAW KNIFE 3" DRAW CARVING KN
3" Draw Knife, Blade Length 3". Developed For Fan Carving But Works Great For Skinning Bark And Roughing-Off Corners. Fits Nicely Into The Tool Box.
NOBLE#:
N114X81
MPN:
KN25
FLEXCUT TOOL
FLEXCUT CUTTING KNIFE 5" DRAW CARVING KN
Cutting Knife, Blade Length 5". Flexible And Razor Sharp Knife Has 5" Of Workable Edge, Designed To Flex Around Contours Where Large Amounts Of Stock Need To Be Removed Quickly. The Tool Can Be Flexed To Accommodate Concave Or Convex Surfaces. Cuts Can Be Made That Conform More Closely To The Finished Shape, Taking Less Time To Sand Or Scrape. The Curved Edge Gives A Skew-Like Cutting Action For A Low Resistance Cut. This Tool Works Great For Carving Chair Legs, Hollowing Chair Bottoms, Or Quickly Roughing-Out Decoys.
NOBLE#:
N114X77
MPN:
KN16
FLEXCUT TOOL
FLEXCUT WHITTLER'S WOOD CHISEL SET WHITTLER'S KIT
Whittler's Kit, Pieces In Set 2 pcs. Kit includes a detail carving knife, a mini detail carving knife, and polishing compound to keep them sharp. Knives are constructed with ash handles and hones and polished, high-carbon steel blades.
NOBLE#:
N114S75
MPN:
KN300
FLEXCUT TOOL
HOOK KNIFE RIGHT-HANDED HOOK CARVING KNIFE
Hook Knife Right-Handed. Constructed with an ash handle and a honed and polished high-carbon steel blade. The hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
NOBLE#:
N114X82
MPN:
KN26
FLEXCUT TOOL
MINI-DETAIL CARVING KNIFE MINI DETAIL CARVE KNIFE
Mini-Detail Carving Knife, Blade Length 3/4". Constructed with an ash handle and a honed and polished high-carbon steel blade. The mini-detail knife has Flexcut's smallest 3/4" straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
NOBLE#:
N114X83
MPN:
KN27
FLEXCUT TOOL
PELICAN CARVING KNIFE PELICAN CARVING KNIFE
Pelican Carving Knife, Blade Length 1-5/8". Constructed with an ash handle and a honed and polished, high-carbon steel blade. The curved 1-5/8" blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
NOBLE#:
N114X78
MPN:
KN18
FLEXCUT TOOL
POLISHING COMPOUND POLISHING COMPOUND
Polishing Compound, Material Aluminum & Titanium Oxide. Designed for quickly maintaining a sharp edge, Flexcut Gold polishing compound has been specifically formulated to apply like a crayon. Its blend of aluminum and titanium oxide provides a balance between aggressive removal of hardened tool steel and offering a high-color polish.
NOBLE#:
N114X85
MPN:
PW11
FLEXCUT TOOL
ROUGH CARVING KNIFE ROUGHING CARVING KNIFE
Rough Carving Knife, Blade Length 2". Constructed with an ash handle and a honed and polished, high-carbon steel blade. Features a straight, 2" blade, for heavier stock removal with a rounded durable point.
NOBLE#:
N114X75
MPN:
KN14