All Categories
Filter products
–
USG
BEADEX PAPER FACED METAL INSIDE DRYWALL
Beadex Paper Faced Metal Inside Drywall Corner Bead, Length 8', Material Metal. Tape On Trim. Designed To Form A True Inner (90 Deg.) Corner. For Use With Any Thickness Of Wallboard. Nailing Is Not Required. No Nail Pops When Wood Framing Shrinks. Use With Setting-Type Compounds For Quicker Finishing. 8' Lengths.
NOBLE#:
N545C26
MPN:
B2-USG
USG
BEADEX PAPER FACED METAL OUTSIDE DRYWALL
Beadex Paper Faced Metal Outside Drywall Corner Bead, Length 8', Material Metal. Tape On Bead. Use For 90 Deg. Outside Corners. Suitable For Use On Any Thickness Of Wallboard. Nailing Is Not Required. Installation And Precision Corner Alignment Is Easier, And No Nail Pops When Wood Framing Shrinks. Use With Setting-Type Compounds For Quicker Finishing And Decoration.
NOBLE#:
N545C25
MPN:
B1XWEL8
USG
CROSS TEE, 1"W X 2'L X 15/32"D, WHITE, GALV STEEL, SUSPENDED CEILIN
Cross Tee, Size 1" W x 2' L x 15/16" D, Color White, Material Galvanized, Type Suspended Ceiling, Fire Rating Fire Resistant. The DONN SDX/SDXL Ceiling Suspension System offers maximum economy, simplicity, and accessibility. It's hot-dipped, galvanized steel construction provides corrosion-resistance and ensures paint adhesion. Working together with USG ceiling panels, they form the fastest-installing ceiling systems in the industry. Both the commercial remodeler and the DIY will find ceiling installation easy with the patented QUICK-RELEASE cross tee clip. The clips are easy-to-remove without tools, minimizing tee damage. An audible click when securing tee-to-tee connections ensures accuracy. The tight USG main tee splice yields sturdy, square ceilings. Flange width: 15/16". Color: White.
NOBLE#:
N440M73
MPN:
SDX/SDXL216
USG
DONN CEILING TILE CROSS TEE, 1" X 4' WHITE
Cross Tee, 1"W X 4'L X 15/16"D, White Galv Steel, Suspended Ceiling, Purchase Per Carton Of (60) Pcs, Sell Per Pc.
NOBLE#:
N440M72
MPN:
SDX416-050
USG
DUROCK STRUCTURE SCREW 1-1/4" DUROCK WOO
Durock Wood Screw, Shank Diameter #8, Thread Diameter #8, Length 1-1/4", Drive Type Square/Phillips, Head Type Wafer, Finish Corrosion Resistant Coating. Specially Designed Screws For Attaching Durock Cement Board To Wood Framing. Corrosion-Resistant And Has Wafer Heads With Ribs To Prevent Strip Out. 1-1/4" Long Screws Are Used For Applying 5/16" Durock Underlayment Or 1/4", 1/2", And 5/8" Durock Cement Board To Subfloors And Countertops Or 1/4" And 1/2" Durock Cement Board To Walls. 200 Screws Per Package.
NOBLE#:
N545C21
MPN:
170189
USG
SHEETROCK EASY SAND LIGHTWEIGHT SETTING
Easy Sand 5 Patching Compound, Size 4 Lb, Type Low Shrinkage. Low Shrinkage Patching Compound In Powdered Form. Mixes Easily With Water. Quick Setting For Fast Repairs Of Drywall And Plaster. Repairs Both Heavy Fills And Surface Fills. Approximate Setting Time 8 To 12 Minutes. Easy-To- Sand. For Interior Use Only. 4 Lb. Box.
NOBLE#:
N545C23
MPN:
384024
USG
SHEETROCK PAPER JOINT DRYWALL TAPE 2-1/1
Sheetrock Paper Drywall Joint Tape, Width 2-1/16", Length 250', Container Type Shrink Wrapped, Color White. Paper Reinforcing Tape For Strengthening And Finishing Joints Of Interior Drywall Panels. 2-1/16" Wide.
NOBLE#:
N545C38
MPN:
382175
USG
SHEETROCK PRE-MIXED LIGHTWEIGHT ALL-PURPOSE DUST CONTROL DRYWALL JO
Lightweight all-purpose joint compound with dust control is a ready-mixed compound with a patented formula that binds up fine residue during sanding to form heavier particles that tend to fall to the floor instead of clouding the air. Weighs up to 35% less than conventional compounds so handling, application, and sanding are simple, easy, and fast. Requires only 2 coats over metal, such as corner beads and fasteners. It bonds like a taping product for a tough, tight bond under most job conditions and combines all-purpose, single-package convenience with optimum taping and topping performance. Lightweight all-purpose joint compound with dust control can take on sheen or appear glossy after sanding. The surface will require priming with Sheetrock First Coat primer USG model No. 544822 (SKU 795232) to equalize the sheen and porosity of the area covered with joint compound and the wallboard surface. Failure to follow this procedure can result in gloss differences in the finish paint over the joint compound, known as banding. Protect from freezing. 1 gallon pail. No. 380609: Size: 3-1/2 gal, Setting Time: 24 hr, Pkg Qty: 1, Package Type: Box No. 380059: Size: 3-1/2 gal, Setting Time: 24 hr, Pkg Qty: 1, Package Type: Pail No. 380063: Size: Gallon, Setting Time: 24 hr, Pkg Qty: 1, Package Type: Pail
NOBLE#:
N619Z15
MPN:
380609