All Categories
WATTS
3/8" OD TUBING SIZE QUICK CONNECT STRAIGHT PLASTIC PUSH VALVE 1/4"C
3/8" OD Tubing Size Quick Connect Straight Plastic Push Valve, Size 3/8" OD Straight Stop, Material Plastic. 3/8" OD tubing size straight valve for hot and cold water applications in exposed locations only. Can be used with copper, CPVC, PEX, and polyethylene tubing. 1 per bag.
NOBLE#:
N252E18
MPN:
PL-3041
WATTS
ABBOTT RUBBER BULK GENERAL PURPOSE FUEL
Bulk Fuel Line Hose, Inside Diameter 1/8", Outside Diameter 1/4", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75, Abrasion- Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N289L30
MPN:
T24005003
WATTS
ABBOTT RUBBER BULK GENERAL PURPOSE FUEL
Bulk Fuel Line Hose, Inside Diameter 5/16", Outside Diameter 5/8", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75, Abrasion- Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N289L31
MPN:
T22005003
WATTS
ABBOTT RUBBER BULK GENERAL PURPOSE FUEL
Bulk Fuel Line Hose, Inside Diameter 3/8", Outside Diameter 5/8", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75, Abrasion- Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N289L32
MPN:
T22005004
WATTS
ABBOTT RUBBER BULK GENERAL PURPOSE FUEL
Bulk Fuel Line Hose, Inside Diameter 1/4", Outside Diameter 1/2", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75, Abrasion- Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N381C20
MPN:
T22005002
WATTS
ABBOTT RUBBER BULK GENERAL PURPOSE FUEL
Bulk Fuel Line Hose, Inside Diameter 3/16", Outside Diameter 3/8", Length 150'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75, Abrasion- Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N381C25
MPN:
T22005001
WATTS
ABBOTT RUBBER BULK HEATER HOSE 1X3/4X75'
Bulk Rubber Heater Hose, Inside Diameter 3/4", Outside Diameter 1", Length 75'. Maximum Operating Temperature: 175 Deg. F. Braiding Offers Better Hose Than Nonbraided Style. Less Chance Of Blow-Off Than Cheaper Versions. Bulk Coils.
NOBLE#:
N380C39
MPN:
T62075003
WATTS
ABBOTT RUBBER BULK HEATER HOSE 3/4X5/8X1
Bulk Rubber Heater Hose, Inside Diameter 5/8", Outside Diameter 3/4", Length 100'. Maximum Operating Temperature: 175 Deg. F. Braiding Offers Better Hose Than Nonbraided Style. Less Chance Of Blow-Off Than Cheaper Versions. Bulk Coils.
NOBLE#:
N380C38
MPN:
T62005002
WATTS
ABBOTT RUBBER BULK MICRO-FUEL LINE HOSE
Bulk Micro Fuel Line Hose, Inside Diameter 7/64", Outside Diameter 1/4", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75. Abrasion-Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N380C59
MPN:
T24005002
WATTS
ABBOTT RUBBER BULK MICRO-FUEL LINE HOSE
Bulk Micro Fuel Line Hose, Inside Diameter 3/32", Outside Diameter 3/16", Length 100'. Maximum Operating Temperature: 175 Deg. F. Brittle Temperature: -40 Deg. F. Material: Pvc Compounds With Polyester Braiding. Hardness: A. Durometer: 75. Abrasion-Resistant Cover, Excellent Fitting Retention At Elevated Pressures. Use For Transfer Of Petroleum Products, Fuel Lines For Small Engines. Bulk Coils.
NOBLE#:
N380C60
MPN:
T24005001
WATTS
APOLLO QUICK-CONNECT QUARTER TURN ANGLE STOP 1/2QCX3/8OD ANGLE VALV
Quick-Connect Quarter Turn Angle Stop, Size 3/8" OD X 1/2" QC, Angle Quick Connect, Finish Chrome Plated, Material Metal. Make water supply stop installation quickly with the 1/2" x 3/8" Quick-Connect 1/4 turn angle valve water supply stops featuring Watts Quick-Connect technology. The revolutionary quick-connect ends work seamlessly with any 1/2" copper, PEX, or CPVC pipe. Simply make sure pipe is free of burrs, mark 1-1/2" from end of pipe and push the stop onto the pipe making sure stop is completely seated to the line marked on the pipe and it's ready to go. A minimum of 3-1/2" of pipe from the floor or wall is needed to insure correct installation. Quick-Connect Stops require no special tools and can be easily removed by pulling back on the collet ring and reused if needed. Bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N620P49
MPN:
LFQC89A
WATTS
APOLLO QUICK-CONNECT QUARTER TURN STRAIGHT STOP VALVE 1/2QCX3/8OD S
Quick-Connect Quarter Turn Straight Stop Valve, Size 1/2" x 3/8" Quick-Connect, Finish Chrome Plated, Material Brass. Make water supply stop installation quickly with the 1/2" x 3/8" Quick-Connect 1/4 turn straight valve water supply stops featuring Watts Quick-Connect technology. The revolutionary quick-connect ends work seamlessly with any 1/2" copper, PEX, or CPVC pipe. Simply make sure pipe is free of burrs, mark 1-1/2" from end of pipe and push the stop onto the pipe making sure stop is completely seated to the line marked on the pipe and it's ready to go. A minimum of 3-1/2" of pipe from the floor or wall is needed to insure correct installation. Quick-Connect Stops require no special tools and can be easily removed by pulling back on the collet ring and reused if needed. Bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N620P50
MPN:
LFQC89S
WATTS
B&K 1/2" X 1/2" FAUCET CONNECTOR 1/2X1/2X16 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 3/8" OD X 16" L, Material Stainless Steel. 1/2" C (Female compression) x 1/2" F.I.P. (Female iron pipe) thread. Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with hex connector nuts. Approved for residential, commercial and industrial applications where 1 must connect water supply to fixture. Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts, and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R60
MPN:
413341
WATTS
B&K 1/2" X 1/2" FAUCET CONNECTOR 1/2X1/2X20 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 3/8" OD X 20" L, Material Stainless Steel. 1/2" C (Female compression) x 1/2" F.I.P. (Female iron pipe) thread. Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with hex connector nuts. Approved for residential, commercial and industrial applications where 1 must connect water supply to fixture. Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts, and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R61
MPN:
413445
WATTS
B&K 1/2" X 1/2" FAUCET CONNECTOR 1/2X1/2X48 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 3/8" OD X 48" L, Material Stainless Steel. 1/2" C (Female compression) x 1/2" F.I.P. (Female iron pipe) thread. Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with hex connector nuts. Approved for residential, commercial and industrial applications where 1 must connect water supply to fixture. Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts, and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N910B67
MPN:
444820
WATTS
B&K 1/2" X 1/2" FAUCET CONNECTOR 1/2X1/2X9 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 3/8" OD X 9" L, Material Stainless Steel. 1/2" C (Female compression) x 1/2" F.I.P. (Female iron pipe) thread. Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with hex connector nuts. Approved for residential, commercial and industrial applications where 1 must connect water supply to fixture. Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts, and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R58
MPN:
413259
WATTS
B&K 1/2" X 1/2" FAUCET CONNECTOR 1/2X1/2X96 FCT CONNECTOR
Do it Faucet Connector, Size 1/2" F X 1/2" F X 96" L, Material Stainless Steel. 1/2" F.I.P. (Female iron pipe) thread x 1/2" F.I.P. (Female iron pipe) thread. Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Used for water supply in exposed location only, hand tighten then 1/4 turn with wrench, use plumbers tape - not pipe dope. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N910B54
MPN:
444782
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 1/2X3/8X60 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 60" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N910B58
MPN:
481882
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X12 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 12" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R50
MPN:
412468
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X16 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 16" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R51
MPN:
412473
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X20 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 20" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R52
MPN:
412477
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X24 FCT CONNNECTR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 24" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N115R53
MPN:
412759
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X30 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 30" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N910B55
MPN:
445029
WATTS
B&K 3/8" X 1/2" FAUCET CONNECTOR 3/8X1/2X48 FCT CONNECTOR
Do it Faucet Connector, Size 3/8" F X 1/2" F X 48" L, Material Stainless Steel. 3/8" C. (Female compression) x 1/2" F.I.P. (Female Iron Pipe), Stainless steel faucet supply line. Braided stainless steel wrapped around reinforced braided PVC with Hex connector nuts. Approved for residential, commercial, industrial applications where 1 must connect water supply to fixture, Core of Virgin PVC is over-braided with polyester yarn then another layer of PVC then the inner core is over-braided with 304 stainless steel to form the strongest flexible supply line with superior hydraulic multi-crimp brass inserts, chrome-plated nuts and Nitrile washer for tight seal. Maximum temperature: 180 deg. F. Maximum pressure: 125 P.S.I., NSF, IAPMO, and CSA listed. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
NOBLE#:
N910B57
MPN:
413836